Topcon GTS-600 Series Instruction Manual page 48

5
Press [F6](SET) key.
Coordinate of P1 will be displayed.
6
Press [F5](YES) key.
Coordinate of P1 will be decided.
The display return to main menu.
Turn power off and move instrument to P1
( Prism P1 move to P0).
7
After the instrument is set up at P1, turn
power on and be measurement possible.
8
Press [F2](STORE) key.
9
Press [F2](Recall NEZ) key.
10
Collimate P , the former instrument point.
0
11
Press [F5](YES) key.
The coordinates at P1 and direction angle
toward P are set.
0
The display return to main menu.
12
Repeat the procedure
wish.
*1)To reset the instrument height or prism height, press [F5](HT) key.
1 11
~ as much as you
[F6] Store NEZ
N :
E :
Z :
>
SET OK?
[F5]
Power off
Move to
P1
Power on
Programs
Select
F1 BS
program
F2 STORE
F3 REM
F4 MLM
[F2] Retaining a Coordinate
1.Store NEZ
2.Recall NEZ
[F2] Recall NEZ
HR: 300°10'20"
>
Set OK?
Collimate
P
0
[F5]
4-4
4 PROGRAM MODE
123.456 m
12.345 m
1.234 m
YES NO
Complete
p
p
p
p MORE
YES
Complete
4/8
NO