Search Data And View Jobs - Topcon GTS-600 Series Instruction Manual

4.6.3 Search Data and View Jobs

The Search Data and View Jobs option can find point numbers with coordinate values and show all jobs
in memory. The options for the search feature are [F1] search first point number, [F2] last point number,
or [F3] by any point number. Point numbers and coordinate values can not be edited in any search
feature.
Another option in the Search Data and View Jobs is a feature that allows the user to view the job stored
in memory by pressing the [F4] key. Also provided is the ability to select another job in memory.
When searching for the side shot point number in a job, a line under the record number will be
displayed, (3PT#:3). The resection point number stored in a job will show the record number in a box, (5
PT# 5)
Follow the instruction below for the Search Data & View Jobs option.
Operating procedure
1
From the options layout menu, press [F3] for
the Coordinate data option.
2
Press [F2] for the Search & View Jobs.
3
To search for the first point number, press
[F1] (First).
4
The first point number with coordinates
appear on the display. To view more point
numbers on the display, press [F6] ( ↓ ).
Press [F1] to exit.
3
To search for the last point number, press
[F2] (Last).
4
The last point number with coordinates
appear on the display. To view more point
numbers on the display, press [F5] ( ↓ ).
Press [F1] to exit.
Operation
LAYOUT
F1
F2
F3
F4
[F3] Coordinate Data
F1
F2
F3
[F2]
F4
Search Data & View Jobs
F1
F2
F3
F4
[F1] 1PT# :1
N :
E :
Z :
EXIT
[F2] Search Data & View Jobs
F1
F2
F3
F4
50PT# :25
N :
E :
Z :
EXIT
4-24
4 PROGRAM MODE
Display
Setting Direction Angle
Setting Layout Point
Coordinate data
Options
Input Coordinate data
Search Data & View Jobs
New Point
Grid Factor
First
Last
PT#
View Memory
1000.000
1000.000
100.000
↑ ↓
First
Last
PT#
View Memory
10.000
9.909
98.75
↑ ↓