Parameters For Communication - Topcon GTS-600 Series Instruction Manual

7.2.2 Parameters for communication

Operating procedure
1
From the main menu icons, press [F6](Para)
to access the parameters option menu.
2
Press the [F2] (Communication) key.
3
The next steps are same as Section
7.2.1"Parameters for Measurement and
Display" , refer to the section 7.2.1. *1)
*1) Press the [F2](I.GTS) key to reset to the factory default settings (Topcon total station current fixed
protocol).
Factory default settings are indicated with underlines in Section 7.1.2"Parameters for communication" .
7 PARAMETERS SETTING MODE
Operation
[F6] Parameters
F1 Measurement
F2 Communication
F3 Password
[F2]
Parameters (Communication)
B.Rate
Data.L
Parity
SET I.GTS
7-5
Display
[1200] 2400 4800 9600
[ 7 ] 8
none odd [even]
↑ ↓
<- ->