Band Selection; Location; Location Info / Installer Info; Figure 7-17 Install Tab - Band Selection - ADRF PSR-VU-9537-UB Manual

7.4.2 Band Selection

Band selection allows the user to specify the desired frequencies by inputting the center frequencies and
selecting the bandwidths.
 Channel Center Frequency: The user can input the center frequency of the pass-band.
 Bandwidth: Allows the user to select the desired bandwidth for the passband. Narrowband choices include
6.25, 12.5 to 325, 331.25 kHz every 6.25 kHz unit.
 Downlink Gain: Minor gain adjustments can be performed on a per channel basis to equalize signal levels
 Downlink Freq - Start: Displays the start frequency of the pass-band once the band selection has been set
 Downlink Freq - End: Displays the end frequency of the pass-band once the band selection has been set


7.4.3 Location

This section allows the user to input the latitude and the longitude of the repeater.

7.4.4 Location Info / Installer Info

This section allows the user to specify the address of the repeater and also the information of the installer.
Advanced RF Technologies, Inc.
Figure 7-17 Install Tab – Band Selection
Figure 7-18 Install Tab – Location
46