Advertisement
Quick Links
_____________________________________________________________________________
_________
1. Connect the LAN cable between laptop's Ethernet port and repeater' Ethernet port.
Note: Under Local Area Connection in Network Settings, make sure to select Obtain
an IP address automatically under Internet Protocol (TCP/IP) properties.
Advanced RF Technologies, Inc. Proprietary Document
Duo-i6525 Quick Start Guide
2607 Colorado Blvd. Los Angeles, CA 90041
TEL: (323) 254-8131 FAX: (323) 254-4928
www.adrftech.com
1
Advertisement
Related Manuals for ADRF DUO-i6525
Summary of Contents for ADRF DUO-i6525
- Page 1 _____________________________________________________________________________ _________ Duo-i6525 Quick Start Guide 1. Connect the LAN cable between laptop’s Ethernet port and repeater’ Ethernet port. Note: Under Local Area Connection in Network Settings, make sure to select Obtain an IP address automatically under Internet Protocol (TCP/IP) properties.
- Page 2 _________ 2. Launch MS Internet Explorer (Version 6.0 or higher) Note: ADRF’s Web GUI is not compatible with any other web browsers (e.g. Netscape, FireFox, Mojilla, etc.). 3. Please type the following IP address on the address bar of MS Internet Explorer: http://192.168.63.1/home.asp...
- Page 3 2607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com _____________________________________________________________________________ _________ 5. If you click on Status, the following window will appear: In this window, the user can view the following: iDEN Band: Will display the center frequencies of the 800 and 900 MHz spectrums on the downlink and uplink respectively.
- Page 4 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com _____________________________________________________________________________ _________ Technical Support: Will display ADRF’s Technical Support contact information. Installer Contact Info: Will display the installer’s name, phone and e-mail address. Note: Once successfully logged in, the repeater model name and the site/cascade ID will be displayed on the top of all the windows (except for the Main Window).
- Page 5 2607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com _____________________________________________________________________________ _________ - If you click the Factory Setting button, the following message box will appear: Heartbeat Time - Heartbeat on and off (Default mode is Off) - Heartbeat periodic time (Range: 1 to 60 min - Default time is 20 min) Alarm Setting - RSSI Alarm at Donor (-100 ~ -50 dBm - Default value is -75 dBm)
- Page 6 - SNMP: Type in the assigned site/cascade ID and manager IP address Default Site ID and Manager IP address is ADRF and 100.10.10.100 respectively. - Repeater: Click install to automatically setup the repeater.
- Page 7 2607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com _____________________________________________________________________________ _________ The following window illustrates how a new administrator can be added by simply clicking on Administrator. If you click on F/W Upgrade, the following window will appear. You can browse through your PC and locate the firmware file.
- Page 8 2607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com _____________________________________________________________________________ _________ Advanced RF Technologies, Inc. Proprietary Document...