Overview; Led; Figure 3-1 Led Panel - ADRF PSR-VU-9537-UB Manual

Silkscreen Label

3. OVERVIEW

3.1

LED

PSR-VU-9537-UBLED indicator lights are located on the inside of the repeater towards the bottom. Below the
LED indicators is a button that is used to trigger the door open alarm.
POWER
AC Fail
DC Fail
Battery Fail
Low Battery
Battery Not Charge
Battery Not Connected
Over Current
Advanced RF Technologies, Inc.
Table 2-2 Terminal Block Definition
AC_NU
AC_R
AC_G
Figure 3-1
Table 3-1
DL
DL Signal Not Detected
DL Signal Low Detected
DL RF Power
DL Out-Band Overload
DL Input Overload
DL DSP Over Input
DL Over Input
DL Over Power
DL Return Power
DL PLL Fail
LED Indicator
Solid Green Normal operation
Solid Yellow Soft Fail alarm exists in the system
Solid Red Hard Fail alarm exists in the system
Line Type Max Supported AWG
Neutral
Line or Hot
Ground
LED Panel
LED Specifications
UL
UL Out-Band Overload
UL Input Overload
UL DSP Over Input
UL Over Input
UL Over Power
UL Return Power
UL PLL Fail
Specifications
18
12AWG
12AWG
12AWG
ALARM
Power-Related Alarms
RF DL Path Related Alarms
RF UL Path Related Alarms
Over Temperature
DSP Communication
Door Open
System Halt