ADRF PSR-VU-9537-UB Manual page 32

7. On the PSR-VU-9537-UA, verify that both AC and BATT switches have been set to the OFF position.
8. Use the provided battery backup cable from the ADRF-BBL-U and connect the wires to the terminal block
located inside of the wiring compartment of the PSR-VU-9537-UA.
9. Install a conduit hub connector that can support 7/8" onto the PSR-VU-9537-UBhole labeled BATTERY and
snake the cable through the conduit.
Advanced RF Technologies, Inc. 32