Table of Contents
Advertisement
2.4.2. Power Switch
The AC Power on/off switch is located on the bottom of repeater. The switch
should be powered on after the repeater has been installed properly.
2.4.3. Mode Selection Switch
The Ethernet port and the mode selection switch for DHCP are located on
bottom of the repeater as shown below in Figure 5. The mode selection switch
has two modes: Host Mode & Remote Mode.
Advanced RF Technologies, Inc. Proprietary Document
Figure 5 – Duo-i6525 Repeater Power Switch View
Figure 6 – DHCP & Mode Selection Switch View
Duo-i6525 RF Repeater
User Manual V1.0
Page 13 of 31
Advertisement
Table of Contents
