Figure 3-5
Annunciator port of PSR-VU-9537-UA
3.2.5 Battery Backup Terminal
This port connects to the ADRF-BBS/BBL-24 (24V battery backup unit) via a dedicated cable provided by the
ADRF.
Figure 3-6
Battery Backup Port (4-pin Female)
When the ADRF-BBS/BBL-24 is connected to the repeater, the battery switch on the PSU must be switched to
the ON position. This will enable the repeater to charge the ADRF-BBS/BBL-24 battery backup unit when AC
power is present.
Figure 3-7
Battery Switch
Connect the ADRF-BBS/BBL-24 to the PSR-VU-9537-UBvia the external battery port to provide continuous power
to the repeater during a power failure.
Advanced RF Technologies, Inc.
22