ADRF PSR-VU-9537-UB Manual page 31

2. Loosen each wheel lock by spinning the red dial to the left.
3. Move the ADRF-BBL-U-24 to the desired location and spin the red dial to the right to tighten wheel locks.
4. The brackets on the back of the ADRF-BBL/BBS-U unit can be used to secure to the wall ONLY when it is
stationed on the floor. Due to the total weight of the ADRF-BBL/BBS-U w/ batteries, it CANNOT be wall
mounted off the ground. The brackets are not designed to support the full weight of the ADRF-BBL/BBS-U
when it is wall mounted without any additional support. If a wall mounting solution is needed, then an
optional wall mount kit (ADRF-BBL/BBS-X-WMK) is available for purchase.
5. Use the included key to unlock the door latches to open the ADRF-BBL-U-24.
6. On the ADRF-BBL-U, set the power switch to the OFF position.
Advanced RF Technologies, Inc. 31