1. INTRODUCTION
PSR-VU-9537-UB bi-directional amplifier (BDA) extends the coverage area of radio communications in buildings and
RF shadow environments.
The unit features low noise figure and wide dynamic range and is certificated to UL 2524
1.1 Highlights
NFPA 1221 2016 code compliant
UL 2524 Listed
Alarming output to supervised circuits for: antenna, amplifier, power supply, battery, and charger failure
UL Type 4 enclosure for indoor environments
Simultaneously supports Class A narrowband and Class B wideband repeater designations
Single band choosable between VHF or UHF band by GUI
Simultaneous Filter Supporting Up to 8 Non-Contiguous Narrow Bands
Air convection cooling without fans
Sharp Filter Roll-off performance (Wide: 60dBc @ Filter Bandwidth Edge + 1MHz | Narrow: 55dBc @ Filter
Bandwidth Edge + 3 * Filter BW)
Web-based GUI Interface; No 3rd party GUI software required
Web-GUI connectivity via DHCP in host mode
Extenal Alarm Function supporting dry contacts 8 outputs and 2 inputs
Support Emergency Power Off Switch
1.2 Product Covered
2-way emergency radio communication enhancement systems, Model PSR-VU-9537-UB with ADRF-BBS-U(or
ADRF-BBL-U) and PSR-ANN
1.3 Product Description
PSR-VU-9537-UB bi-directional amplifier (BDA) extends the coverage area of radio communications in buildings
and RF shadow environments. This unit feature low noise figure and wide dynamic range and are certified to UL
2524.
PSR-VU-9537-UB is a revolutionary digital public safety repeater designed to protect the lives of first responders
and building occupants.
Through the use of digital signal processing (DSP) filtering technology, the PSR-VU-9537-UB helps eliminate
adjacent channel interference to allow band selectivity and support for VHF and UHF Public Safety frequencies
band. Single wideband and up to 8 non-contiguous narrowband filters can be simultaneously supported via
ADRF's celebrated web-based GUI, which provides versatility and total control to the users.
The PSR-VU-9537-UB is the best-in-class public safety repeater and it is fully compliant with International Fire
Code (IFC) and National Fire Protection Association (NFPA)
Advanced RF Technologies, Inc.
9