Psr78 Overview; Switches & Fault Indicators; Leds; Message Board Alarms And Notification - ADRF PSR78 User Manual

3. PSR78 Overview

3.1 Switches & Fault Indicators

3.1.1 LEDs

The PSR78 has 3 LED's located on inside of the repeater.
PSR78
Power
Soft Fail
Hard Fail

3.1.2 Message Board Alarms and Notification

Parameters
AC fail
DC fail
Communication failure
RMF
RESET
Heartbeat
OSC
UL RSSI fail
UL PLL fail
H/W fail
S/W fail
UL Emission fail
DL RSSI fail
ISO fail
DL PLL fail
DL Spur fail
Interfere
Figure 1: Module LED
Specifications
Solid Green Module power is ON
OFF Module is powered OFF
Solid Yellow Soft Fail alarm exist in the system
OFF No Soft Fail alarm are present in the system
Solid Red Hard Fail alarm exist in the system
OFF No Hard Fail alarms are present in the system
Remark
Power supply out of range
Power supply out of range
Internal Communication failure
Field replaceable module failure
Reset alarm
Heartbeat
Oscillation detected
Power at coverage port too high
UL Synthesizer failure
Hardware failure
Software failure
UL Out-of-band emissions out of spec
Donor Power too high/low
Low isolation
DL Synthesizer failure
DL Spurious emissions out of spec
Interferer power exceeded
PSR78 Repeater
User Manual V0.1
Page | 11