[Separation Sheet] - Riso MH Series User Manual

Table of Contents

Advertisement

66
Chapter 3 Functions for Master Making
11
Check if separation is performed
as intended.
The [Preview] screen
scanning the original.
• Touch [Continue] to start master making.
• Touch [Editor] to move to the [Editor] editing
screen. You can use the touch panel to
change the areas that you want to separate.

[Separation Sheet]

Select this option for originals that contain photos.
On the original, lay a white sheet (tracing paper) of the
same size. Using a commercially available red marker
pen, draw pen frames to enclose the areas that you
want to separate.
A range of 1 mm to 3 mm (3/64 inch to 1/8 inch) is
available for the pen width.
This method is useful when you cannot write on the
original.
Print drum (cylinder) 1
(Outside the areas)
Original
Tracing paper
The original is separated into inside and outside of the
specified area.
BWhen using [Separation Sheet], you
cannot select [Auto] under [Contrast].
1
On the original, lay a sheet of trac-
ing paper and draw pen frames to
enclose the areas that you want to
separate.
Use a white sheet as a tracing paper that has
the same size as the original.
(A
83) is displayed after
Print drum (cylinder) 2
(Inside the areas)
Print result
BDraw pen frames using a com-
mercially available red marker
pen. For more information on
how to draw pen frames, see step
1
(A
64) in [Specified area].
BUsing a light table or window glass
helps with the drawing because the
original becomes visible through the
tracing paper.
2
Display the master making basic
screen for dual-color mode.
In the [HOME] screen
Color].
3
Place the tracing paper.
■ When using the glass platen
Place the tracing paper with the scanning side
(the side on which pen frames are drawn) fac-
ing down and align the center of the tracing
paper with the [H] mark. Then, close the platen
cover.
■ When using the auto document
feeder
You can place the original and the tracing paper
together.
In this case, place the tracing paper over the
original. Place the tracing paper and the origi-
nal with their scanning side facing up.
Tracing paper
Tracing paper
(A
24), touch [m Dual-
Original

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mh 9450Mh 9350

Table of Contents