Riso MH Series User Manual page 40

38
Chapter 2 Basic Operations
BThe usable paper sizes are differ-
ent for print drums (cylinders) 1
and 2.
BThe optional A4 / Letter type print
drum (cylinder) can be used only
as print drum (cylinder) 1.
However, if the color of the A4 /
Letter print drum (cylinder) that is
set and the color of print drum
(cylinder) 2 are the same and the
paper is a standard size, the fol-
lowing conditions automatically
switch the print drum (cylinder)
that is used.
CWhen the reproduction size
CWhen the reproduction size
BIf print drums (cylinders) 1 and 2
have the same color and size, you
cannot select [l].
3
Touch [MasterMake].
The master making basic screen for mono-
color mode is displayed.
4
Place an original.
(A 33 "Placement of Originals")
BThe size of the placed original is dis-
played in [Page] in the master mak-
ing basic screen. If the displayed
size is different from the size of the
placed original, place the original
again.
5
Check the paper.
(A 30 "Setting up the paper feed tray and the
paper")
(A 15 "Paper size")
becomes a standard size that
exceeds the A4 / Letter size,
print drum (cylinder) 2 is used.
becomes a standard size that
does not exceed the A4 / Letter
size, print drum (cylinder) 1 is
used.
BThe usable paper sizes are differ-
ent for print drums (cylinders) 1
and 2. (A
BThe size of the placed paper is dis-
played in [Paper] in the master mak-
ing basic screen. If the displayed
size is different from the size of the
placed paper, place the paper again.
BThe position of the paper-feed set-
ting lever
[Paper] in the master making basic
screen.
6
Check the paper receiving tray.
(A 31 "Setting up the paper receiving tray")
7
Check the [Auto Process] setting.
(A 28 "What is [Auto Process]?")
BWhen you place originals on the
optional auto document feeder,
[Auto Process] turns on automati-
cally.
You can change the default setting
in [ADF Auto Process]
under [Admin.].
8
Set the master making conditions.
(A 52 "Functions for Master Making")
(A 108 "Useful Functions")
9
Enter the number of copies to be
printed using the numeric keys.
10
Press the [START] key.
Master making starts and a proof copy is out-
put.
• When the [Auto Process] setting is on, go to
step 13.
• When the [Auto Process] setting is off, go to
step 11.
BWhen mono-color printing is per-
formed with print drum (cylinder)
2, [Confidential] operation
(A 119) with print drum (cylinder )
1 may be automatically executed
during master making.
15 "Paper size")
(A 31) is displayed next to
(A 138)