Riso MH Series User Manual page 189

Code Message
G07 INK 2 & MASTER
Near expiration
Use or replace soon
G08 INK 1, INK 2 & MASTER
Near expiration
Use or replace soon
G10 !! Slip Sheet Sorting is Not
Available with This Paper Size !!
Replace with Paper of Proper
Size
■ J00: Paper jam error
The location in which an original or paper is jammed blinks on the screen.
BIn order to prevent a paper jam, use appropriate papers for printing.
(A 15 "Printing papers")
BWhen placing originals on the optional auto document feeder, use an appropriate original.
(A 15 "Originals")
Error location
Optional auto document feeder
Paper feeding side
Action
In order to use the ink cartridge and the master roll under optimal con-
ditions, use them within approximately 24 months after their manufac-
ture date.
In order to use the ink cartridge and the master roll under optimal con-
ditions, use them within approximately 24 months after their manufac-
ture date.
When you want to execute [Slip sheet sorting]
the following size.
(Standard sizes)
MH9350
A3p, B4p, A4p, or Foolscapp
MH9450
Ledgerp, Legalp, or Letterp
(Custom sizes)
210 mm x 315 mm to 320 mm x 432 mm
(8 1/4 inches x 12 13/32 inches to 12 19/32 inches x 17 inches)
For custom size, select the desired paper size for [Paper Size]
Action
Open the ADF cover, and then remove any jammed originals.
Depending on the location of the jammed original, you can also remove it from
the bottom of the auto document feeder by raising the platen cover.
Check the paper feeding side and lower the paper feed tray, and then remove
any jammed papers.
If the error display does not disappear, press the [RESET] key.
BOccasionally, switching the paper feed setting lever can prevent a
paper jam.
(A 30 "Setting up the paper feed tray and the paper")
Chapter 11 Troubleshooting
(A 114), place paper of
(A 72).
187
11