[Recognized By] - Riso MH Series User Manual

150
Chapter 7 Setting the Operation Conditions
ID print
If a user sets [ID print] for the printer driver, it is neces-
sary to perform the authentication operation (entry of
PIN code, insertion of USB flash drive for authentica-
tion, or holding of IC card over reader) before perform-
ing operations for the original data on this machine.
Performing the authentication operation can limit the
access to the original data to only the person who has
set [ID print]. 2
(A 40 "Printing from Computer")
(A 45 "Printing the Saved Original Data")
2
The administrator can access the authentication data of
any user.

[Recognized by]

Select one of the following methods that is to be used
for identifying the user.
• PIN Code
• USB Flash Drive
• IC Card (when the optional IC Card Reader is
installed)
BBe sure to select the above setting first.
If you change [Recognized by], all of the
user identification settings are erased
including the settings for [Create User].
1
Touch [User Management] in the
[Admin.] screen.
2
Touch [Recognized by].
3
Touch the authentication method
to be used.
B[IC Card] is displayed when the
optional IC Card Reader is installed.
A confirmation screen is displayed.
4
Touch [OK].