Mounting - Simplex 4098 Applications Manual

4098 TrueAlarm QuickConnect SMOKE SENSORS,

Mounting

Notes:
1. Feed the wires through the hole of the mounting plate.
2. Fasten the mounting plate to the electrical box or adapter plate
as shown, with tabs facing towards devices.
3. Connect the wires to the terminal strip (provided loose)
according to Figure 18.
4. Connect terminal strip to the pin strip on the QuickConnect
sensor.
5. Fit the QuickConnect sensor to the adapter plate pushing the
wires back into the electrical box and give a clockwise turn to
attach.
6. Using the relay module requires a 1½-inch extension ring (not
supplied) mounted to the 4-inch square or octagonal electrical
box to meet the space requirement of the relay cube and its
wires. The relay module cannot be used in single-gang
electrical box installations. The relay module 4098-9822
MUST BE installed in the electrical box directly behind the
QuickConnect2 sensor.
Use Figure 18 to mount the 4098-9710 and 4098-9713 QuickConnect smoke sensors. The 4098-9757 uses the 4098-9788
two wire base, see Figure 3 to mount base.
Caution: Do not loop wire under terminals. Break wire runs to provide supervision.
# 6-32 SCREW
WITH WASHER
(NOT SUPPLIED)
(TIGHTEN UNTIL SNUG,
1-3 IN. LBS.)
4098-9710
TERMINAL STRIP
Figure 18. Mounting the QuickConnect Sensors
firealarmresources.com
Continued
FLUSH MOUNTED
(BOX TO BE FLUSH OR RECESSED 1/4 " MAX )
SINGLE GANG (2 1/8" DEEP) 4" (10.16cm x 1 1/2" DEEP)
OCTAGONAL
ELECTRICAL BOX
ELECTRICAL BOX
(NOT SUPPLIED)
( NOT SUPPLIED)
4098-9832
ADAPTER PLATE KIT
(REQUIRED FOR 4" SQUARE/
OCTAGONAL
SURFACE MOUNTED
ELECTRICAL BOX)
QUICK CONNECT SENSOR
MOUNTING PLATE
# 8-32 x 1 1/4"
PANHEAD MACHINE
SCREW
(TIGHTEN UNTIL SNUG,
1-3 IN. LBS.)
L- L+ P- P- P+ P+
4098-9713
TERMINAL STRIP
QUICK CONNECT SENSOR
CLOCKWISE
FOR ATTACHMENT
36
4" (10.16cm x 1 1/2" DEEP)
SQUARE
ELECTRICAL BOX
(NOT SUPPLIED)
# 8-32 x 1 1/2"
PANHEAD MACHINE
SCREW
(TIGHTEN UNTIL SNUG,
1-3 IN.-LBS.)
# 8 x 1" THREAD FORMING
PANHEAD SCREW
(TIGHTEN UNTIL SNUG,
1-3 IN.-LBS.)
Continued on next page