Agilent Support, Services, And Assistance; Service And Support Options; Calibration Options - Agilent Technologies FieldFox MW N9913A Service Manual

General Product Information

Agilent Support, Services, and Assistance

Agilent Support, Services, and Assistance
Information on the following topics is included in this section.
•

"Service and Support Options"

•

"Calibration Options"

• "Contacting Agilent"
• "Shipping Your Analyzer to Agilent for Service or Repair"
Service and Support Options
The analyzer's standard warranty is a one-year return to Agilent Technologies service warranty.
NOTE
There are other repair and calibration options available from Agilent Technologies.
Contact Agilent for additional information on available service agreements for this
product. Refer to
Calibration Options
Commercial Calibration Certificate with Test Data
A complete set of measurements that test the analyzer to the manufacturer's published specifications. It
includes a calibration label, a calibration certificate, and the corresponding calibration data report. This
calibration conforms to ISO 9001.
ISO 17025 Standards Compliant Calibration
A complete set of measurements that test the analyzer to the manufacturer's published specifications. It
includes a calibration label, an ISO 17025 calibration certificate, and the corresponding calibration data,
measurement uncertainties, and guardbands on all customer specifications. This calibration conforms to
ISO 17025 and ISO 9001.
This calibration option is available at the time of purchase or can be obtained later by sending your
analyzer to Agilent for calibration. Refer to
ANSI Z540 Standards Compliant Calibration
A complete set of measurements that test the analyzer to the manufacturer's published specifications. It
includes both pre- and post-adjustment data with measurement uncertainty information compliant to the
ANSI/NCSL Z540 standard.
This calibration option is available at the time of purchase or can be obtained later by sending your
analyzer to Agilent for calibration. Refer to
2-8
"Contacting Agilent" on page
"Shipping Your Analyzer to Agilent for Service or
"Shipping Your Analyzer to Agilent for Service or
FieldFox Analyzer
2-9.
Repair".
Repair".
N9927-90003