Huawei UPS5000-E User Manual page 73

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 3-8 Installing an expansion bolt (unit: mm)
1.
2.
3.
4.
Step 3 Move the UPS over its castors to the installation position.
Step 4 If the castors need to hang in the air, perform
Installation.
Step 5 Open the front and rear doors of the cabinet.
Step 6 Insert four M12x115 expansion bolts into the expansion bolt holes in the floor,
and tighten the expansion bolts.
Issue 03 (2022-01-19)
Drill a hole into the concrete floor using a hammer drill. The hole depth
ranges from 52 mm to 60 mm.
Slightly tighten the expansion bolt and vertically insert it into the hole. Knock
the expansion bolt using a rubber mallet until the expansion sleeve is fully
inserted into the hole.
Partially tighten the expansion bolt.
Remove the bolt, spring washer, and flat washer.
Copyright © Huawei Technologies Co., Ltd.
Step 1–Step 2 in Non-Secured
3 Installation
65