Huawei UPS5000-E User Manual page 145

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Item
Branch
current
exceeding
higher
threshold
Power factor
After Branch breaker open alarm enable and Branch exception alarm enable
are set to Custom on the PDU Param. screen, the screen shown in
displayed. Perform the following operations:
1.
2.
3.
Figure 4-38 Custom settings
Issue 03 (2022-01-19)
Description
If this parameter is set to
Enable, the system generates
an alarm when the branch
current exceeds the higher
current threshold. If this
parameter is set to Disable,
the system does not generate
the alarm under any
condition.
Set this parameter based on
the actual power factor of
the air conditioner.
In the area shown by (2), select a load branch to be set.
In the area shown by (1), select an output branch to be set.
After selecting an output branch, tap Disable or Enable in the area shown by
(3).
NO TE
Custom setting methods for Branch breaker open alarm enable and Branch exception
alarm enable are the same. Branch exception alarm enable is used as an example.
Copyright © Huawei Technologies Co., Ltd.
4 LCD Interface
Default Value Value Range
Disable Disable,
Enable
- 0.00–1.00
Figure 4-38 is
137