Huawei UPS5000-E User Manual page 195

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Step 3 Remove the copper bar and install it on the new circuit breaker.
Figure 8-7 Removing the copper bar
Step 4 Turn off the new circuit breaker, install a new circuit breaker using an extracting
kit, and close the handle.
Figure 8-8 Closing the handle
Step 5 Reinstall the protective cover for the circuit breaker and turn on the circuit breaker.
Check that the load is operating properly.
----End
Issue 03 (2022-01-19)
NO TE
Remove and install the circuit breaker using an extracting kit. Do not operate barehanded.
Copyright © Huawei Technologies Co., Ltd.
8 Parts Replacement
187