Huawei UPS5000-E User Manual page 209

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Alarm ID Alarm Name
(Alarm ID-
Cause ID)
0566-1 Output overload
0570-4 BPM module
abnormal
0583-1 Inter-rack par.
cable abnormal
0583-4
0583-5
Issue 03 (2022-01-19)
Severity Cause
Minor ● The load is
● Derating
● The module is
Critical ● The bypass fan
● The ambient
● The load is
Critical ● The inter-rack
● Only one rack
● An ECM is
The inter-rack
industrial
frequency
synchronization
cable is broken.
The inter-rack
carrier
synchronization
cable is broken.
Copyright © Huawei Technologies Co., Ltd.
Solution
1. Check that there is no
excessive.
2. Check that the module
reduces the
rated system
power.
3. If the alarm persists,
damaged.
1. Check the bypass fan and
is not
functioning
properly, or the
2. Check that the ambient
air channel is
blocked.
3. Check that there is no
temperature
exceeds the
upper
threshold.
excessive.
1. Check the inter-rack
parallel system
CAN bus is
2. Rectify the disconnection
disconnected
or short-
3. Replace the ECM.
circuited.
works in a
parallel system.
faulty.
Replace the inter-rack parallel
cable.
B Alarm List
overload.
power is not derated due
to a fan fault.
replace the power module.
air channel. If the fan is
faulty, replace it.
temperature has not
exceeded 40°C.
overload.
parallel system CAN bus.
or short-circuit fault.
201