Huawei UPS5000-E User Manual page 109

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 4-5 Runn Info screen 2
Table 4-3 AC Output
Item
Phase voltage (V)
Line voltage (V)
Phase current (A)
Frequency (Hz)
Power factor
Table 4-4 UPS Load
Item
Crest factor
Load ratio (%)
Active power (kW)
Apparent power (kVA)
Reactive power (kvar)
Issue 03 (2022-01-19)
NO TE
If Current equal. detection in System Info > Settings > Output Setting is set to Enable,
and the number of inverter modules is greater than or equal to 2, Mod. Cur. Eql. Data is
displayed on the Runn Info screen.
Copyright © Huawei Technologies Co., Ltd.
Description
AC output phase voltage
AC output line voltage
AC output phase current
AC output frequency
Proportion of output active power to output
apparent power
Description
Proportion of the peak value of load current to
the valid value
Load rate of each phase on the UPS, that is, the
proportion of the actual power to the rated power
Output active power of each phase on the UPS
Output apparent power of each phase on the UPS
Output reactive power of each phase on the UPS,
that is, square root of the difference between the
square of output apparent power and the square
of output active power
4 LCD Interface
101