Safety Instructions - HBM MP85A Series Operating Manual

Safety instructions

1 Safety instructions
This operating manual applies to the devices
S MP85A
S MP85ADP
S MP85ADP-PN
S MP85A‐S
S MP85ADP‐S and
S MP85ADP-PN-S
In this manual, the designation MP85A process controller is used for all device
versions. If information/data refers only to specific device versions, this will be
clearly indicated in the text and one of the above designations used.
Intended use
The device is to be used exclusively for measurement tasks and directly
related control tasks within the operating limits detailed in the specifications.
Use for any purpose other than the above is deemed improper use.
The device complies with the safety requirements of DIN EN 61010 Part 1
(VDE 0411 Part 1).
Any person instructed to carry out installation, startup or operation of the
device must have read and understood the operating manual and in particular
the technical safety instructions.
In the interests of safety, the device should only be operated by qualified
personnel and as described in the operating manuals. During use, compliance
with the legal and safety requirements for the relevant application is also
essential. The same applies to the use of accessories.
The device is not intended for use as a safety component. Please also refer to
the "Additional safety precautions" section. Proper and safe operation requires
correct transportation, storage, siting and installation, and careful operation.
This operating manual must be kept and handed over if the MP85A process
controller is sold or passed on.
8 MP85A
A0293_06_E00_03 HBM: public