How Can I Find The File System On My Pc, And Which Should I Use - HBM MP85A Series Operating Manual

FAQs: Frequently asked questions (MP85A and PME Assistant)
Ethernet (MP85A only): If you do not want to search through all the addresses
of this segment (all addresses in the yellow field) for the Ethernet interface
(Scan), you can enter individual IP addresses and have them added to the list
of available devices. Each time you click on Add IP to device list, the software
checks whether a device from the PME family can be found at the address in
question. If not, it is added to the list of devices.
5. Use the Scan button to start a scan of the interface to determine the
assigned addresses.
6. Click on Start to open the configuration program.
All (Devices) from the PME family entered or found in the device list are dis­
played in the tree view in the left-hand area of the program window. Here you
can click on an address to set it.
Notes
S If you see the message "This software version is not fully compatible with
the device version you are using", you should update the PME Assistant via
the Internet.
S MP85A only: If you wish to connect via the Ethernet interface but another
connection has been established via this interface, you must confirm that
you wish to disconnect the existing connection and establish a new one by
entering the number shown in the dialog. This prevents any inadvertent dis­
connection: Connection to your PC disconnects the other connection, i.e.
the other connection (PLC, other PC) receives no more data.
13.4 How can I find the file system on my PC, and which
should I use?
In the root directory of your hard disk (e.g. c:\), open the Properties context
menu. The file system used is shown on the third line of the following dialog
(General) tab.
The NTFS file system is required if you are recording numerous processes and
more than 65,000 files may be generated on the PC during a test.
MP85A
A0293_06_E00_03 HBM: public
117