Using The Pme Assistant - HBM MP85A Series Operating Manual

Important
The minimum requirements listed above are sufficient if you have only con­
nected one device. Suitable, more powerful PC hardware is necessary if you
also wish to transfer result and curve files from several devices to the PC.
You can find further information in the "FASTpress Suite" quick start guide.
7.4

Using the PME Assistant

Interface mode
Opens the Setup
window
Fig. 7.2 Start window
MP85A
A0293_06_E00_03 HBM: public
Starting up/Setup mode
Interface
factory
settings
Scans the bus
for connected
PME modules
65