How Do I Set An Ip Address On My Pc - HBM MP85A Series Operating Manual

FAQs: Frequently asked questions (MP85A and PME Assistant)
7. Press the SET key to confirm.
A flashing double arrow and Yes appear on the second line.
8. Press the SET key to confirm.
PROFIBUS interface (MP85ADP only)
You can only set the PROFIBUS address in the PME Assistant. All other
parameterization of the PROFIBUS system must be done using the relevant
software from other manufacturers, e.g. PROFIBUS software from Siemens.

13.2 How do I set an IP address on my PC?

In Windows Vista and Windows 7
► Use the Windows Start menu to open the Control Panel -> Network and
Sharing Center. Then View status (Windows Vista) for the desired connec­
tion. In Windows 7, click on your LAN connection to view the status.
► Click on Properties and specify an administrator account or confirm the
security prompt.
► Select Internet protocol version 4 (TCP/IPv4) and click on Properties.
► Click on Use the following IP address and enter an address in which the
first three groups of digits match those of the MP85A and only the last
group of digits contains a different number between 1 and 254. The last
group of digits must not match the group of digits in the MP85A!
► For the Subnet mask, enter the same groups of digits as the MP85A.
► Next, click OK or Close to close all open dialogs.
Example:
The IP address of the MP85A is 192.168.169.80, the subnet mask is
255.255.255.0.
On the PC, enter 192.168.169.123 as the IP address and 255.255.255.0 as the
subnet mask.
®
In Windows XP
MP85A
A0293_06_E00_03 HBM: public
115