What Does The Flow Diagram Of A Measurement With No Data Loss Look Like; What Causes A Digital Output To Be Set - HBM MP85A Series Operating Manual

FAQs: Frequently asked questions (MP85A and PME Assistant)
13.22 What does the flow diagram of a measurement with no
data loss look like?
Started
Ready
Running
Result valid
Process OK

13.23 What causes a digital output to be set?

A digital output can be set by the following events:
S The limit value was reached in a channel.
S There is a measurement error in a channel.
S A transducer test has been performed.
S A defined process state has been reached.
S A certain tolerance window is OK.
146
Start (ext. signal "Start"
or condition fulfilled)
Stop (condition fulfilled) or end, if ext. signal for end
condition is used and signal "End" is active
Offline evaluation
Time until stop (follow-up time, only possible when using
Measurement
Initialialization (typ. 25 ms)
Reaction time (typ. 2 ms for external signal)
A0293_06_E00_03 HBM: public
(internal) end condition fulfilled
(with ext. signal "End" this is
already fulfilled)
Signal is
condition
sufficient RAM space is
available for the
measurement
Save to MMC/PC
Save (to RAM)
internal stop condition)
only set if end
is fulfilled and
next
MP85A