When I Launch The Pme Assistant, What Do The Options Do - HBM MP85A Series Operating Manual

FAQs: Frequently asked questions (MP85A and PME Assistant)
Tip
If your hard disk was not already formated with NTFS at the factory, we recom­
mend that you have this done. Your PC supplier will generally provide you with
a conversion program. Otherwise, try launching CONVERT.EXE (in the SYS­
TEM32 subdirectory of Windows) with the parameters c: /fs:ntfs , if c: is
the drive that needs to be converted (CONVERT.EXE c: /fs:ntfs).
Conversion does not involve any loss of data. However, you should back up
your hard disk beforehand for peace of mind.
13.5 When I launch the PME Assistant, what do the options
do?
To enable windows to be generated more quickly, the default setting of Update
menu tree of setting window is disabled (see Start window of the PME
Assistant). The program then assumes that the device settings are unchanged.
If you have manually changed a setting in the device, or if you have worked in
Offline mode in the meantime, all settings must be read again, i.e. you need to
enable Update menu tree of setting window.
Tip
Enable Open settings window automatically to open the setting window
automatically 5 seconds after the program is launched.
Load most recent dialogs automatically shows you all windows and dialogs
in the same size and position as they were when you last ended the program.
To launch the program automatically with Windows, create a shortcut to the
program (PMEASSIST.EXE) in your Windows startup folder. Disable Update
menu tree of setting window and enable Open setting window automati­
cally and Load most recent dialogs automatically. This way, the program is
also launched the next time Windows is started, and all program windows you
last opened are opened this time, too.
If you have saved a window group (File
enter this file as a start parameter: Create a shortcut to the PME Assistant and
118
->
A0293_06_E00_03 HBM: public
Save window group), you can also
MP85A