Connecting Several Devices - HBM MP85A Series Operating Manual

Installing/removing the MP85A (schematic diagrams)
4.2

Connecting several devices

1.
Fig. 4.4 Connecting a ribbon cable
You can connect up to four MP85A process controllers via a ribbon cable. This
cable takes care of the local supply voltage, CAN bus connection and carrier
frequency synchronization between the devices.
20
Ribbon cable female connector
Further devices are
interconnected via this
connector.
3.
A0293_06_E00_03 HBM: public
2.
58 mm
Recommended gap for
ribbon cable female
connectors
Color coding
on pin 1
MP85A