Can Termination Resistor - HBM MP85A Series Operating Manual

Battery position
Fig. 6.4 Correct battery position
The buffer battery is only required for the integrated real-time clock. The device
functions are not affected by the battery. However, the time is also saved with
the curve and results files. Therefore, set the correct time and date in the
device (PME Assistant: "Basic settings" menu).
There is no automatic summer/winter time switchover.
6.3

CAN termination resistor

Switch the CAN termination resistor on or off using switch S2 (see Fig. 6.5).
Fig. 6.5 Switch for CAN bus termination resistor
MP85A
Switch settings/Replacing the battery
S2
A0293_06_E00_03 HBM: public
-
+
Toggle switch S2 for
termination resistor
ON OFF
49