Table of Contents
Advertisement
1) Ultrasound (FHR1, FHR2)
3) Intrauterine Pressure (IUP)
This symbol indicates that the electric shock defend grade of this applied part is Type BF.
DECG (Direct Electrocardiography) (Not available in this model)
This symbol indicates that the protection against electric shock of this applied part is Type CF.
The monitor described in this User Manual is not protected against:
a) The effects of defibrillator shocks
b) The effects of defibrillator discharge
c) The effects of high frequency currents
d) The interference of electrosurgery equipment
1.3 Ultrasound Safety Guide
Fetal Use
The monitor is designed for continuous fetal heart rate monitoring during pregnancy and labor.
Clinical interpretation of fetal heart rate traces may be helpful in the diagnoses of fetal and/or
maternal problems and complications.
Instructions for Use in Minimizing Patient Exposure
The acoustic output of the Fetal2EMR Monitor is internally controlled and cannot be varied by
the operator in the course of the examination. The duration of exposure is, however, fully under
the control of the operator. Mastery of the examination techniques described in the User Manual
will facilitate obtaining the maximum amount of diagnostic information with the minimum
amount of exposure. Exercising clinical judgment in monitoring low risk patients will avoid
unnecessary insonation.
1.4 Safety Precautions
WARNING and CAUTION messages must be observed. To avoid the possibility of injury,
observe the following precautions during the operation of the instrument.
2) External TOCO
4) Fetal Movement Mark (FM)
- 2 -
Chapter 1: Safety Guide
Advertisement
Table of Contents
