Table of Contents
Advertisement
5.2.4 Switching Print Self-Check On or Off
To switch print self-check on or off:
1. Select the setup key
2. Select Recorder > Print Self-Check.
3. Select ON or OFF (default).
4. Select OK.
5.3 Understanding Recorder Paper Printout
1 If there is any difference between the display and the printout, the printout should
prevail.
2 If the data is ambiguous, clinicians should make diagnoses based on the clinical
assessment.
Figure 5-1 is an example of the recorder paper with traces. Comparing it with the monitor screen,
you can find this extra information on the printed recording:
1
2
3
4
on the main interface.
WARNING
Figure 5-1 Example of recorder paper with traces
- 32 -
Chapter 5: Printing
5
6
7
Advertisement
Table of Contents
