Table of Contents
Advertisement
Chapter 3 Installation Guide
Note: Installation must be carried out by qualified personnel authorized by Wallach
Surgical Devices. In order to ensure the operator and patient safety, read through this
chapter before using this monitor.
3.1 Installing Battery
Switch off the monitor and unplug it before installing or removing the battery.
If the monitor is purchased with the optional rechargeable lithium-ion battery, follow these steps
to install the battery:
(1) Battery Installation
1) Fold the LCD flat and then place the monitor upside down on a flat surface covered with
cloth or other type of protective pad.
2) Remove the screws of the battery compartment using a Philips-head screwdriver. Remove the
battery compartment cover.
3) Take the battery out from package and put it into the compartment. Make sure the battery
connector is on the left and the battery label faces down.
WARNING
- 18 -
Chapter 3: Installation Guide
Advertisement
Table of Contents
