Tearing Off Recorder Paper; Adjusting Screen Angle - WALLACH FETAL2EMR 902300 User Manual

Fetal monitor
Table of Contents

Advertisement

Chapter 3: Installation Guide

3.4 Tearing Off Recorder paper

Perform the following procedure to tear off the recorder paper:
1) Press the PRINT key
on the front panel if the recorder is running.
2) Pull up the end of the paper (fold the paper if it is very long), and use moderate force to tear
paper off in an upward motion along the paper-cutting edge.
CAUTION
Always tear off the paper along the paper-cutting edge or the perforation. Pulling the
paper fiercely may damage the printhead or cause misalignment of the paper in the
drawer.

3.5 Adjusting Screen Angle

The Fetal2EMR screen can lie completely flat, or tilt to an appropriate angle.
To tilt or to fold the screen,
1) Push the tab on top of the screen right to spring it open.
2) Hold the centre part of the screen on the top edge and push it forward or backward to the
required angle.
- 23 -

Advertisement

Table of Contents
loading

Table of Contents