Table of Contents
Advertisement
Chapter 8: Understanding Measurement Results
Chapter 8 Understanding Measurement Results
8.1 Changing Screen Display Mode
The monitor has three display modes: trace-numeric mode, trace mode and numeric mode.
If you want to observe the traces (FHR, TOCO and AFM) and numerics simultaneously, choose
the trace-numeric mode (figure 8-1).
If you want to observe traces only on the screen, choose the trace mode (figure 8-2).
If you want to observe the numerics in large typeface, choose the numeric mode (figure 8-3).
To change the display mode, select the display mode switch
on the main interface. The
display mode will switch among the three modes.
Figure 8-1 Trace-Numeric Mode
- 45 -
Advertisement
Table of Contents
