Table of Contents
Advertisement
2.4.2 Setup Interface
The setup menu is provided to change the monitor configurations and monitoring settings. Press
the Setup key
on the main interface to open this menu.
18
19
In the setup main menu, you have access to all the items other than System. You can select EXIT
to exit from this menu.
The items in this main menu all have submenu(s). To confirm the setting changes in the
submenus, you need to select OK to exit. If you don't want to store the new settings, select
Cancel, or press the START key to return to the main interface. If no operation is performed
within 30 seconds, the menu will return to the upper level directory. The change will not be
stored.
Once you select OK to confirm the setting changes, the new settings will be stored in the
monitor's long-term memory. If the monitor is switched on again after being switched off or a
power loss, it will restore the new settings.
For your reference, when the cursor is located at an item in this menu, the monitor provides a
brief function description of this item in a pane with blue frame under the items. For example, the
cursor is located at Start Monitoring in the illustration above. Correspondingly, its function Set
new monitoring items is shown in the blue frame pane.
Figure 2-12 Setup Menu
Item
Screen element
18
Setup Items
19
Function Description
- 17 -
Chapter 2: Monitor and Accessories
Advertisement
Table of Contents
