Table of Contents
Advertisement
7.6.2 Changing Maternal Information
You can change the current patient's information after the monitoring starts:
1. Select the patient ID area next to the Mat. Info key
2. Select ID.
3. Select the required number for patient's ID on the soft keyboard.
4. Select OK.
5. Select Name.
6. Enter the required letters for patient's name on the soft keyboard.
7. Select OK.
8. Select OK.
Figure 7-2 Mat. Info inputting menu
The monitoring does not stop when you change maternal information. After you select OK to exit,
the new ID takes the place of the old one for this patient.
1 The monitor only saves the most recent inputted maternal information.
2 If the maternal information is changed in the printing process, the monitor prints the
new ID and name immediately.
7.6.3 Switching Mat. Info Inputting On or Off
If the Mat. Info entering function is switched on, the menu will pop up for you to input the ID and
name for the patient after the START key is pressed. The monitoring starts immediately after
exiting from the menu.
To switch the Mat. Info Inputting function on or off:
1. Select the setup key
2. Select Start Monitoring > Mat. Info.
3. Select ON or OFF (default).
4. Select OK.
CAUTION
on the main interface.
- 44 -
Chapter 7: Fetal Monitoring
on the main interface.
Figure 7-3 Soft keyboard
Advertisement
Table of Contents
