Troubleshooting; Introduction - Troubleshooting; Fault Messages - Husqvarna CEORA Razor 43M Operator's Manual

6.1 Introduction - troubleshooting

You can find all the troubleshooting messages in the
information on www.husqvarna.com.

6.2 Fault messages

The fault messages in the table below are shown in the Automower
representative if the same message shows frequently.
Message
Cutting system blocked
Trapped
1691 - 002 - 14.01.2022

6 Troubleshooting

Messages menu in Automower
Cause
The cutting motor is blocked by grass or
other objects.
The blade disc is in water.
The grass is too high.
The product is behind a number of obsta-
cles in a small area.
®
Connect. You can find more
®
Connect app. Speak to your Husqvarna
Action
Examine the cutting motor and remove
grass or other objects.
Move the product and prevent the collec-
tion of water in the work area.
Adjust the cutting height to the height of
the grass.
Adjust the schedule settings to increase
the operation time.
Examine the area and remove the obsta-
cles which make it hard for the product to
move away from this location.
Troubleshooting - 35