Husqvarna CEORA Razor 43M Operator's Manual page 39

Message
Charging current too high
Map problem
Wheel drive problem, right/
left
No power in charging station
Searching for satellites
1691 - 002 - 14.01.2022
Cause
Incorrect or defective power supply unit.
There is no specified work area.
The charging station or the reference sta-
tion was moved.
The map object file is incorrect.
The wheel is blocked by grass or other
objects.
The power supply unit is incorrect or de-
fective.
Power failure.
The product cannot charge because the
contact plates and the charging plates
are not connected.
Weak satellite signal to the reference sta-
tion.
Weak satellite signal to the product.
Action
Examine that the power supply unit and
charging station are not defective. Make
sure that you use the correct power sup-
ply unit and charging station. Restart the
product. If the problem stays, speak to
your authorized service center.
Make a work area in the Automower
To make a work
Connect app. Refer to
area on page 21 .
Move the charging station or the refer-
ence station to their initial positions.
Do a new installation of the map.
Do a check of the map in the app. Adjust
the map and save it.
Delete the map and do a new installation.
Examine the drive wheel and remove
grass or other objects.
Examine the power supply unit. Replace
it if necessary.
Examine and correct the cause of the
power failure.
Make sure that the charging plates and
the contact plates are connected. Clean
the contact plates and charging plates.
The satellite signal is temporary weak.
The product will start to operate when the
satellite signals are good.
Examine the installation of the reference
station. Refer to the Operator's manual
for the Reference station.
The satellite signal is temporary weak.
The product will start to operate when the
satellite signal are good.
Examine if there is an object between
the product and the sky that cause inter-
ference with the satellite signal. Remove
the object or do a new installation to not
include these parts in the work area. Re-
To make a work area on page 21
fer to
Troubleshooting - 39
®