Husqvarna CEORA Razor 43M Operator's Manual page 14

A
A
Note:
Short reversing distance decreases the
risk of track marks. A long reversing distance can
be necessary to have good satellite signals at the
docking point.
• If the product must not operate in a part of the
docking area, put a protective wall that is minimum
15 cm / 6 in. in height. The docking area is a
circular area around the charging station with a
radius (A) of 3 m / 9.8 ft.
14 - Installation
>110°
35° 35°
B
>110°
60°
10°
B
•
•
•
•
•
•
Note:
The product uses the charging station
signal to find the charging station when it is in the
docking area.
Put the charging station near a power outlet.
Examine how to install the mains cable safely.
Put the charging station on a flat surface, not on
gravel.
Husqvarna recommends to install the charging
station on a hard surface, such as concrete or
equivalent. To install the charging station on a soft
surface, use the support plate accessory.
Put the charging station on a level surface.
max. 5 cm / 2"
max. 5 cm / 2"
Max +/- 4 cm / 1.6 In.
The baseplate of the charging station must not be
bent.
A
1691 - 002 - 14.01.2022