Maintenance; Introduction - Maintenance; Maintenance Schedule - Husqvarna CEORA Razor 43M Operator's Manual

5.1 Introduction - maintenance

WARNING:
before you do maintenance on the product.
WARNING:
For better operation and lifetime of the product, make
sure to clean the product regularly and replace worn
parts. Obey the instructions in
When the product is new, examine the blade discs
and blades each week. If the wear is low, you can
increase the interval for the next time you examine the
blade discs and blades. If there is much wear, you can
decrease the interval.

5.2 Maintenance schedule

The maintenance schedule shows how to do
servicing and maintenance on the product. Follow the
maintenance schedule for a better operation and to
increase the lifetime of the product.
To prepare
Clean the product on page 32 .
Clean the product. Refer to
Examine the product for damage and wear.
Do a update of the firmware for the drive unit and cutting deck. Refer to
firmware over the air (Firmware over the air FOTA) on page 25 .
Do a update of the firmware for the charging station.
Do a check of the servicing messages for recommended upgrades.
1691 - 002 - 14.01.2022

5 Maintenance

Set the product to OFF
Use protective gloves.
Warranty on page 52 .
It is important that the blade disc rotates easily and that
the edges of the blades are not damaged. The usual
lifetime of the blades are 1 to 4 weeks. The conditions
that follow can increase or decrease the lifetime of the
blades:
• Operation time and dimension of the work area.
• Length and thickness of the grass.
• Soil, sand and use of fertilizers.
• Objects such as cones, tools, stones and roots in
the work area.
Note:
The cut result can be unsatisfactory if the
blades are blunt. Refer to Replacement of the blades
and blade discs on page 32 on how to replace the
blades.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Speak to your approved servicing dealer.
Weekly
X
X
Download
Every
Every
third
year
year
X
O
O
Maintenance - 29