Husqvarna CEORA Razor 43M Operator's Manual page 19

3.7.5.2 To do a visual check of the charging station
1. Make sure that the LED indicator lamps on the
charging station have a green light.
2. If the LED indicator lamps do not have a green
light, do a check of the installation. Refer to
indicator lamps on the charging station on page
42 and To install the charging station on page 17 .
3.7.6 Installation of the reference station
Install the reference station according to the instructions
in the Operator's manual for the reference station.
®
3.7.7 Automower Connect
®
Automower Connect is a free app for your mobile
device. Use the app for installation, settings and
operation of your product. You can also find more
information for example about alarm and statistics in the
®
Automower Connect app.
The app gives 2 modes of connectivity: Long-
range cellular connectivity and Short-range Bluetooth
connectivity.
• The dashboard shows the current operation of the
product and the battery state of charge.
Account menu shows an overview of your
• The
Husqvarna account settings and lets you set the
unit format.
My mowers menu lets you manage all the
• The
products that are connected to your Husqvarna
account and add new ones.
Note:
All countries do not support cellular connection
®
to Automower Connect because of regional specified
cellular systems. The included Automower
lifetime service only applies if there is a third part sub-
supplier of 2G/4G available in the operational area.
3.7.7.1 To install the Automower
1. Download the Automower
mobile device.
2. Sign up for a Husqvarna account in the
®
Automower Connect app.
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
1691 - 002 - 14.01.2022
LED
®
®
Connect
®
Connect app
®
Connect app on your
4. Log in to your Husqvarna account in the
Automower ® Connect app.
®
3.7.7.2 Automower Direct
®
You can use Automower Direct if you have the
®
Automower Connect app and the PIN code for the
product but no Husqvarna account.
®
Automower Direct uses short-range Bluetooth
connectivity. It can be used if the cellular connectivity
is not supported or for a temporary connection to the
product.
3.7.8 Husqvarna Fleet Services
™
Husqvarna Fleet Services is a cloud solution that
gives the commercial fleet manager an overview of
all products. It also gives the fleet manager the
possibility to control all products remotely. Husqvarna
™
Fleet Services is available as a web service and as an
app. When you use the Husqvarna Fleet Services
you will be redirected to the Automower
For more information about Husqvarna Fleet Services
refer to www.husqvarna.com.
3.7.8.1 To connect to the product with Husqvarna Fleet
™
Services
1. Download the Husqvarna Fleet Services
Automower ® Connect app to your mobile device.
2. Log on to the Husqvarna Fleet Services
3. Follow the instructions about how to pair the
product with Husqvarna Fleet Services
3.7.9 To do the basic settings
When the product is set to ON for the first time, there
are some basic settings to do before the product can
start to operate.
1. Set the product to ON.
Note:
The Bluetooth ®
of the product is enabled for 3 minutes. If the
pairing operation between the product and the
mobile device is not completed correctly, push
®
the Bluetooth button on the product to enable
®
Bluetooth again.
2. Log on to your Husqvarna account in the
®
Automower Connect app.
®
3. Start Bluetooth on your mobile device.
4. Select My mowers in the Automower
app, and add your product.
5. Enter the factory PIN code.
Note:
Keep your PIN code safe.
6. Do a pairing operation of the product and the
reference station.
®
™
™
app
®
Connect app.
™ ,
™
app and
™
app.
™
.
pairing operation mode
® Connect
Installation - 19