Wexiodisk WD-6 Installation And User Manual page 42

Operating instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
All the values are laid out in tables, with each table containing a certain number
of rows, one for each value. The table containing the values for the washing
temperature and washing times for the different programmes is "0.0".
The values for washing temperature and washing times are on rows 01 to 04
inclusive.
Table 0.0
Row number
01
02
03
04
To select service mode and change the washing temperature and washing time,
follow these instructions:
•
•
•
•
•
•
•
Glasstilt
--
Display for the table numbers and the row numbers of each table.
--
Display of values and other information for all the row numbers in the
tables.
--
The "Beer glasses"
programme button (P1)
table rows or to reset the values to those last saved.
The "Standard glasses"
or move forwards between the tables.
The "Wine glasses"
programme button (P3)
backwards between the tables.
Use the 0/1 button to enter or exit service mode.
Relates to
Washing temperature
Washing time programme
"Beer glasses" (P1)
Washing time programme
"Standard glasses" (P2)
Washing time programme
"Wine glasses" (P3)
When moving to "service mode", the washing programme must be finished.
Press the 0/1 button (9). Both the displays (2, 4) will now show two
horizontal dashes "--" and the machine will be in shut-off mode.
Hold the 0/1 button (9) down for approx. 3 seconds until the top display (2)
shows "0.0". When "0.0" appears on the display (2), the machine is in
service mode.
Press the button for "Beer glasses" (P1) (6). The top display (2) will now
show 01, the first row number in the table. The bottom display (4) shows
the set washing temperature flashing; only values that flash when they
appear can be changed. If the temperature is to be changed, press the
button for "Standard glasses" (P2) (7) to increase the value, or the button
for "Wine glasses" (P3) (8) to reduce the value.
If the washing time for a programme is to be changed, use the button for
"Beer glasses" (P1) (6) to move to the next row number in the table. For
explanations of row numbers 01, 02, 03 and 04, see table "0.0" above.
When the settings have been changed, exit service mode by holding down
the 0/1 button (9) for approx. 3 seconds until the displays (2, 4) show two
horizontal dashes"--" The changed values are now saved.
Return to normal operating mode by then quickly pressing the 0/1 button
(9).
38
is used to move between the
is used to increase a value
programme button (P2)
is used to reduce a value or move
Rev. 2.0 (202202)
Range of settings
55 - 70° C
1.0 - 6.0 min.
1.0 - 6.0 min.
1.0 - 6.0 min.