Waas Setup - Furuno GP-32 Operator's Manual

7. OTHER FUNCTIONS
9. Press the [ENT] key. If you selected
AUTO no further operation is necessary.
See the illustration below for a calculation
example. For MAN, press the [ENT] key,
enter speed with the cursor pad and then
press the [ENT] key.
The illustration below shows what the
display might look like using Route-01 as
an example.
Time-to-Go
Estimated Time of Arrival
CALCULATION
MODE : ROUTE
NO. : 01 (WPTS: 4)
KOBE
SPD : AUTO
TTG: 1H55M
RNG: 11.25 nm
Range
Typical TTG, ETA, range calculation for route
10. Press the [MENU] key twice to finish.

7.2 WAAS Setup

1. Press the [MENU] key once or twice to
open the menu.
2. Choose WAAS/DGPS and then press the
[ENT] key.
WAAS/DGPS SETUP
MODE
WAAS SEARCH: AUTO
CORRECTIONS DATA SET:
DGPS STATION: AUTO
RATE
FREQ
STATION : GOOD DATA: GOOD
SIG.S: 55.2 dB
WAAS/DGPS SETUP menu
3. The cursor is selecting MODE; press the
[ENT] key.
GPS
WAAS
INT BEACON
EXT BEACON
AUTO
WAAS/DGPS mode options
34
OSAKA
ETA: 07:17
BRG: _ _ _
: AUTO
120
02
: 200BPS
: 310.0 kHz
SNR: 22.0dB
GPS position fixing
DGPS position fixing
4. Choose appropriate mode referring to the
descriptions below. Press the [ENT] key.
WAAS: Position fix by WAAS
AUTO: Position fix in priority order of
DGPS, WAAS, and GPS.
5. Press the [ENT] key.
6. WAAS SEARCH is selected; press the
[ENT] key.
AUTO
MANUAL
WAAS search options
7. Choose AUTO for automatic search or
MANUAL for manual search and then
press the [ENT] key. For MANUAL, press
the [ENT] key, enter appropriate WAAS
satellite number, referring to the
illustration below and then press the
[ENT] key.
AUTO mode and GEO satellite
(as of April 2002)
Provider GEO Satellite
POR (134)
WAAS
AOR-W (122)
AOR-E (120)
EGNOS
IOR (131)
One-degree threshold
GEO satellite and coverage area
Longitude
178°E
54°W
15.5°W
64.5°E