Displaying Position In Lops; Offsetting Gps Position; Gps Setup Menu - Furuno GP-1610CF Operator's Manual

POSITION-RELATED OPERATIONS
10.1 Displaying Position in
LOPs
Position can be displayed in latitude and lon-
gitude, Loran C LOPs or Decca LOPs.
Displaying position in Loran C LOPs
1. Press the MENU key.
2. Press the [0] key to select the SYSTEM
menu.
3. Press the [2] key to select PLTR SETUP.
PLTR SETUP
OWN
NAVAID
SCALE SCALE
00 (00~15)
SMOOTHING
00 min
SPD AVERAG
TRUE
BEARING
AUTO
MAG CALIB
06.3 W
EVENT
EVNT METHOD
L/L
POSITION
LC
DISP
Chain: Sec 7970: 11-26
LOP CALIB
+000.0 s
+000.0 s
: Cursor
Figure 10-1 Pltr setup menu
4. Press or to select POSITION.
5. Press s to select LOP.
6. Press to select DISP.
7. Select LC.
8. Press to select Chain: Sec.
9. Key in Loran C GRI.
10. Key in Loran C slave code.
11. Key in other Loran C slave code.
12. If necessary, press
CALIB.
LC DE ALL
RANGE
MAG
MAN
00.0 E
MARK
LOP
DE
: E/W, +/-
ESC: Esc
to select LOP
13. Press the key to display plus(+) or mi-
nus(-).
14. Key in offset(s).
15. Press the ENT key.
16. Press the MENU key.
Displaying position in Decca LOPs
Follow the procedure in "Displaying position
in Loran C LOPs." At step 7 select DE in-
stead of LC. Key in chain number and station
pair: 1 for R, 2 for G, 3 for P. See Decca Chains
in the Appendix for chain number.

10.2 Offsetting GPS Position

You may wish to offset the GPS position to
refine position accuracy. First, moor boat at a
pier and plot position shown by GP-1610CF
on a nautical chart. Then, enter offset.
1. Press the MENU key.
2. Press the [0] key to select the SYSTEM
SETUP menu.
3. Press the [7] key. The GPS SETUP menu
appears.
GPS SETUP
GPS SMOOTHING
000 (000~999)
Posn
000 (000~999)
Speed
GEODETIC
WGS-84 OTHER (002)
POS CALIB
00.000'N
UNHEALTH
RSTR
TIME DIFF
+09: 00
: Cursor
Figure 10-2 GPS setup menu
4. Select POS CALIB.
00.000'E
DISABLED ( _ _ )
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
: N/S, E/W, +/-
ESC: Esc
10-1