Cleaning And Maintenance - ElectrIQ eiQCURV60EN User Manual

CLEANING AND MAINTENANCE

Disconnect range hood from power supply before cleaning or
servicing.
Clean the hood surface frequently using mild detergent and a warm
1.
damp sponge or cloth.
Do not use harsh alkalis or abrasives.
2.
Avoid the use of scouring powers or dishwasher compounds.
3.
If the optional carbon filter is being used, these cannot be cleaned
4.
and require replacing every 2-3 months depending on frequency of
use. They are available from the retailer who supplied your hood.
The stainless steel must be cleaned regularly, weekly cleaning will
5.
yield best results. Dry with a clean soft cloth. A specialized stainless-
steel cleaning fluid may be used.
Ensure that wiping is done along with the grain of the stainless steel
6.
to prevent any unsightly crisscross scratching patterns from
appearing
INFORMATION
Water must be kept away from the motor, control panel and all
electrical components.
GREASE FILTERS
It is recommended that the grease filter is cleaned every two
to three months by carrying out the following instruction:
1. Remove the grease filter from the cooker hood and wash it
in a solution of warm water and neutral liquid detergent,
leaving to soak.
2. Rinse thoroughly with warm water and allow to dry
thoroughly before refitting.
3. The metallic filter may alter in colour after several washes.
There is a fire risk if cleaning is not carried out in accordance
with the instructions.
15