Cleaning And Maintenance; Filter Information - ElectrIQ eiQCH110CEILING User Manual

CLEANING AND MAINTENANCE

Disconnect range hood from power supply before cleaning or servicing.
Clean the hood surface frequently using mild detergent and a warm damp
1.
sponge or cloth.
Do not use harsh alkalis or abrasives.
2.
Avoid the use of scouring powers or dishwasher compounds.
3.
If the optional carbon filter is being used, these cannot be cleaned and require
4.
replacing every 2-3 months depending on frequency of use. They are available
from the retailer who supplied your hood.
Information
Cleaning water must be kept away from the motor, control switch and all electrical
components.
GREASE FILTERS
It is recommended that the grease filter is cleaned every two to three months by
carrying out the following instruction:
Remove the grease filter from the cooker hood and wash it in a solution of warm
1.
water and neutral liquid detergent, leaving to soak.
Rinse thoroughly with warm water and allow to dry thoroughly before refitting.
2.
The metallic filter may alter in colour after several washes.
3.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
Replacement grease filters are available under the following codes:
HOOD
eiqch110ceiling
INSTALLING GREASE MESH FILTERS
To install filters for the following four steps.
1. Angle the filter into slots at the back of the
hood.
2. Push the button on handle of the filter.
3. Release the handle once the filter fits into a
resting position.
4. Repeat to install all filters.
GREASE FILTER
eiqgfceiling
12