Operation; Grease Mesh Filters - ElectrIQ eiQCURV60EN User Manual

USING YOUR COOKER HOOD
STOP
STOP
LOW
MEDIUM
HIGH
LIGHTS

GREASE MESH FILTERS

The mesh filters can be cleaned by hand. Soak them for 3 - 4 minutes
in warm water with a grease-loosening detergent. Brush gently with a
soft brush. To avoid damage, do not apply unnecessary pressure.
Leave to dry naturally out of direct sun light.
Filters should be washed separately to crockery and kitchen utensils.
it is advisable not to use rinse aid. Replacement grease filters are
available from the retailer under code: eiQGFA60 for eiQCURV60EN/
ENBL;eiQGFA90 for eiQCURV90EN/ENBL
INSTALLING GREASE MESH FILTERS
1. Angle the filter into slots at the back of the hood.
2. Pull the handle of the filter.
3. Release the handle once the filter fits into a resting position.
4. Repeat for all filters.
LOW MEDIUM HIGH LIGHTS ON/OFF
Turns off the motor
Will extract at low speed
Will extract at medium speed
Will extract at high speed
Turn the light on and off
12