Replacing And Adjusting The Lower Belt - Stiga MPV 320W Workshop Manual

WORKSHOP MANUAL
MPV 320W / 520W
2. Remove the engine air filter cover (4), which
would prevent the passage of the belt
3. Undo the screw (5) and the joint head (6).
Pay attention to the loading the spring
which causes a sudden movement of the head
after loosening the screws
4. Loosen and remove the belt (7) from the pul-
leys.
7

5.1.2 Replacing and adjusting the lower belt

The lower belt connects the engine to the return shaft. For interventions, follow the procedure
below.
1. Pull the lever (1), located near the right front
wheel, to loosen the cutting deck drive belt.
3
5 - TRANSMISSION - WHEELS - STEERING
5. Fit the new belt (7), following the diagram.
6. Replace the head (6) and adjust the nut (8) un-
4
2. Remove the right side (2) fixed by a quick re-
2
Chapter
5
7
9
8
til the spring (9) is 80 mm long.
1
lease fastener (3) and by a screw (4).
EDITION PAGE
2017 19 /
64
6
4